UN 223-1PH32-0XB0

SM 1223 Digital input/output Module which is similar as Siemens S7-1200 PLC
1) SM 1223 Digital input/output 8DI 24V DC/ 8DO Relay
2) Compatible with Siemens 6es7
223-1PH32-0XB0
3) Digital module;
4) Could connect with Siemens 1200 CPU and Modules;
5) 3-year warranty;
6) 2-3 working days after payment can ship;
7) Material: ABS, IC

SKU: 5269e416ad31Categories: UniMAT, Unimat PLC controllers SERIESBrand: UniMAT
Model SM 1223
DI 8×24 V DC 
DQ 8×RLY
Order number UN 223-1PH32-0XB0
dimensionWxHxD(mm) 45x100x75
weight 230 g 
Power consumption 5.5 W
Current consumption (SM bus) 145 mA
Current consumption (24VDC) Each point input used is 4mA
7mA per relay coil used
Digital input
Enter points 8
Type Sink/Source type (IEC Class 1 sink type)
Rated voltage 24V DC at 4 mA, nominal
Allowed continuous voltage Max 30V DC
Surge voltage 35VDC, lasting 0.5s
Logic 1 signal (minimum) 2. 15V DC at 5mA
Logic 0 signal (maximum) 5 V DC at 1 mA
Isolation (field side and logic side) 707VDC (type test)
Isolation group 2
Filter time 0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8ms (selectable, 4 in a group)
Number of inputs connected simultaneously 8
Cable length (meter) 500 (shielded); 300 (unshielded)
Digital output
Output points 8
Type Relay, dry contact
Voltage range 5-30VDC or 5-250VAC                                                                               
Logic 1 signal at maximum current –
Logic 0 signal with 10 KQ load –
Current (maximum) 2.0A
Lamp load 30 W DC/200 WAC                                                                           
On-state contact resistance 0.2 Ω maximum for new equipment
Leakage current per point –
Inrush current 7A with contacts closed
Overload protection None
Isolation (field side and logic side) 1500VAC (coil and contacts)
None (coil and logic side)
Isolation group 2                                                                  
Current at each common terminal 10 A
Inductor clamping voltage —                                                                                                         
Switching delay Maximum 10 ms
Mechanical life (no load) 10,000,000 open/close cycles                                                            
Contact life under rated load 100,000 open/close cycles
Behavior during RUN-STOP Previous value or replacement value (default value is 0)
Number of outputs switched on simultaneously 8
Cable length (meter) 500(shielded);150(unshielded)